Cilbond 24

CILBOND 24Cilbond 20E is supplied in 10L, 25L and 200L containers. 250ml trial samples are also available upon request. Please contact us or call 01772 322888.


Bonding Capabilities:

Cilbond 24 is a one-component bonding system developed to give high performance bonding with numerous elastomers. It has also been designed as an effective post-vulcanising (PV) bonding system and has the further benefit of being suitable for bonding rubbers to certain fibres, cords and fabrics, such as cellulose, polyamides, polyester and glass.

Bonding problems solved with Cilbond 24:

By virtue of its novelty as a one-coat bonding system, Cilbond 24 is considered for many bonding applications. Below is a brief summary of some of the more interesting problems solved to date.

  • Bonding to stainless steel and Nickel - excellent results. NOTE: On smooth non-blasted stainless steel, a minimum drying time of 2 hours at 25C is needed, or force drying for 2 - 5 minutes at 85 - 95C is required.
  • Bonding metal treated with yellow chromated zinc, Cilbond 24 gave excellent bond results.
  • Cilbond 24 has proved especially satisfactory when used as a post vulcanisation system for components exposed to salt water environments.
  • Epichlorohydrin rubber and Vamac® bonded to mild steel with Cilbond 24 gave excellent heat resistance.
  • Cilbond 24 has been shown to give the best compromise of bonding and glycol resistance for NR based hydromounts.
  • For post-vulcanisation (PV) bonding Cilbond 24 can bond all elastomers listed in the introduction, plus HNBR and even FKM, but each compound must be tested individually for suitability.

< Back to Bonding Agents

Interested? For more information on Cilbond 24 bonding agent, please contact us or call 01772 322888.

Interested in our Products?

Fill in your details and we'll call you back.

 
CAPTCHA Image Reload Image