Cilbond 33A / 33B

CILBOND 33A / 33BCilbond 33A / 33B is supplied in 1L and 10L containers. 250ml trial samples are also available upon request. Please contact us or call 01772 322888.


Bonding Capabilities:

Cilbond 33A / 33B is a two component adhesive system, which is mixed to produce a one-coat system.

It is suitable for bonding fluoroelastomer compounds of all hardnesses to a variety of substrates including metals (either chemically treated or mechanically abraded) and thermoplastics, thermosets and fabrics.

The Cilbond 33A / 33B system will bond all the major grades of fluoroelastomers available including Viton®, Daiel®, Aflas® Technoflon® and Fluorel®, which are bisphenol or amine cured and may also bond some peroxide cured fluoroelastomers and even some fluorosilicones, especially if post cured.

Where to use Cilbond 33A / 33B:

For the bonding of all hardness grades of fluoroelastomer to substrates by compression or injection moulding. A minimum cure schedule of 30 minutes at 150°C is recommended to maximise adhesion and the environmental resistance of the bond.

  • Oil-Seals
  • Shaft Seals
  • Gaskets
  • Valve Seals
  • Rollers
  • Hoses

< Back to Bonding Agents

Interested? For more information on Cilbond 33A / 33B bonding agent, please contact us or call 01772 322888.

Interested in our Products?

Fill in your details and we'll call you back.

 
CAPTCHA Image Reload Image